نشت یاب ضد انفجار

Product Model: GOLIATH

نشت یاب اتان متان و گازهای سمی تشخیص – اندازه گیری – تجزیه و تحلیل ابزار اندازه گیری مقاوم و ضد انفجار با پمپ مکنده داخلی و باتری NiMH قابل دستیابی. زمان کارکرد: بسته به کاربرد و نور پس زمینه کاربرد مطابق با DVGW G 465-4: – مناسب برای فضای بسته – بازرسی بالای زمین – بازرسی ساختمان خلوص گاز- تجزیه و تحلیل اتان محدوده اندازه گیری: – متان ppm، حجم٪ – دی اکسید کربن 0 – 5 حجم٪ / 0 – 100 حجم٪ CO2 – اکسیژن 0 – 25 حجم٪ O2 (اختیاری) – مونوکسید کربن 0 – 500 ppm CO (اختیاری) ابعاد: 200 x 100 x 87 میلی متر وزن: تقریبا 1250 گرم ابزار ضد انفجار: علامت: II 2G Ex ib d IIB T3/T4 Gb BVS 09 ATEX E 079 X محدوده دما: -10°C <= Ta <= +40°C

GAS DETECTOR SHOP DETAIL
  •  نشت یابی کاملاً قدرتمند است. علاوه بر کاربرد معمولی بوی گاز گزارش شده، بخش بزرگی از کاربردها بر اساس عبارت «عدم وجود گاز» است. در چنین مواردی، نصب کننده باید علت را تعیین کند و از اندازه گیری فشار در تاسیسات گاز مطلع شده است. GOLIATH با محدوده اندازه گیری 0 تا 2000 hPa (سنسور فشار اختیاری) برای این کار نیز کاملاً مناسب است. اندازه گیری غلظت مونوکسید کربن علاوه بر نظارت بر گازهای قابل اشتعال یک روش آزمایش شده در بسیاری از شرکت های عرضه گاز است. به همین دلیل، برنامه “بازرسی ساختمان” همچنین غلظت CO را نشان می دهد و در صورت تجاوز از 10 پی پی ام، زنگ هشدار را ایجاد می کند. این امر اپراتور را از مشکلات احتمالی در مسیریابی گاز اگزوز مطلع می کند.
  • Time-tested Esders operation concept.
  • Very quick initial break-in phase after being switching on or changing application.
  • Extremely short reaction times when measuring CH4 and CO2 in all concentrations.
  • Oxygen and up to 3 toxic gas sensors are available as an option.
  • Ethane analysis with automatic measurement result assessment can be integrated.
  • Optional pressure measuring up to 2,000 hPa.
  •  
  • Speed measurement
    For our gas stand pipe we now offer the possibility to measure the speed when gassing or emptying gas pipelines.
    The gas test stand pipe is a proven tool in the field of gas supply, which is used for pressure testing, filling and commissioning of gas pipes. For the gassing of the pipe, the DVGW recommends filling the pipes at a speed of between 3 and 7 m/s in the pipe. We now offer a practical solution for this task. A measuring pipe is used, which is equipped with an internal pitot tube and is connected to the GOLIATH gas measuring device for evaluation.
     
    The GOLIATH Option v is equipped with a differential pressure sensor to determine the static and dynamic pressure in the pitot tube. The user enters the diameter of the main pipe and its length in the menu. The display of the GOLIATH then shows the speed in the main pipe and the estimated time required for gassing and the elapsed filling time, as well as the gas concentration.
     
    EVERYTHING FROM ONE SOURCE
  • DisplayLCD graphic display 128 x 64 pixels, illuminable
    Power supplyNiMH rechargeable battery pack
    Operating temperature-10 °C to +40 °C
    Operating timeVaries depending on application and illumination
    ChargingCharging cradle supplied by 12 Volt DC or 230 Volt AC,
    Charging time approx. 3 hours
    USB port (specified for 500 mA),
    Charging time approx. 8 hours
    Data StoreFlash memory 4 Mbyte for more than 1 Mio. measurement values
    Protection typeIP54
    Dimensions200 x 100 x 87 mm
    Weightapprox. 1.250 g
    Explosion protection ATEXBVS 09 ATEX E 079 X – Ex II 2G Ex ib d IIB T3/T4 Gb